Type Designation: FMP
Temperature Range: 0 to 1400 ° C
Common Materials: See below
Common Size: Ø 6.0mm to 26.7mm (3/4" nominal bore)
Common Process connection: Taper or parallel BSP, NPT, Metric

Application Notes:
Assembly component (with head and sensor)
Replacement sheath
High temperature
Fast response
Will withstand tough industrial use

Special Options:
Special materials available on request
Wear and chemical resistant coatings
Ceramic lining sheath for rare metal thermocouples
Hygienic designs
Head fittings
Reduced tip options
Pressure testing
Material Certificates

Appropriate Sheath Materials Maximum Temperature
Kanthal AF, Kanthal APM 1400 ° C
353 MA 1175 ° C
253 MA 1150 ° C
446 SS 1100 ° C
310 SS 1100 ° C
Sanicro 31 HT 1100 ° C
Alloy 600 (Inconel) 1100 ° C
Alloy 800 HT (Incoloy) 1100 ° C
Hastelloy C276 1040 ° C
Hastelloy B2 815 ° C
321 SS 800 ° C

Insert Types that can be used in this protection sheath:

Mineral Insulated Inserts Thermocouple RT or Thermistor
Mineral Insulated Insert with Transmitter MTT MRT
Mineral Insulated Insert with Block MTI MRI
Mineral Insulated with Pot seal & Flexible tails MTP MRP
Mineral Insulated Insert with Head MTH MRH
Mineral Insulated Insert with DIN Plate MTD MRD

Rigid Metal Tube Inserts Thermocouple RT or Thermistor
Insert with DIN Plate TTD TRD
Insert with Block TTI TRI
Sensor with Head TTH TRH
Tube Sensor with Lead and Flexible tails TTF TRF
Insert with Transmitter TTT TRT

Cable Inserts  
Basic Insulated Element BTE



FMP

FMP

Zoom Drawing

This page URL:
http://www.peaksensors.co.uk/fabricated-metal-protection-sheath-fmp.html

This Page was generated with web2printer 4 in: 0.045674 seconds http://www.printer-friendly.com