Type Designation: TRD
Measuring Range: -100 to + 500 ° C
Common Sensor Types: 1 Pt 100 B
Temperature Coefficient: 0.3850 ohms /° C
Wiring: 3 wire, marked red/red/white
Common Diameters: Ø 6.0, 8.0mm
Common Sheaths: 321 SS
Block size: 41mm, M4 Screws 33mm PCD
Cold End Max Temperature : 100 ° C
Tail Detail : 75mm tails, 10mm tinned

Application Notes:
Ready for customer fitted transmitter (specify which type is intended to be used)
Inexpensive insert
Very cheap design if maximum is 225 ° C
Used in pocket/head assemblies
Suitable for quick replacement on plants
Industry standard size
Spring loaded for good thermal contact
DIN standard lengths available

Special Options:
Duplex
Higher accuracy sensors A, 1/3,1/5,1/10 DIN
Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
2 or 4 wires
Compression fitting
Tagging
RT can be replaced with a thermistor