Resistance thermometers with blocks can commonly be found in chemical works. This design can also be used in a thermowell, extension or head assembly.

Type Designation:TRI
Temperature Range:-100 to 500 ° C
Common Sensor Types:1 Pt 100 B
Temperature Coefficient:0.3850 ohms/° C
Common Sensor Size:2 x 2.2mm, thin film
Wiring:3 wire, marked red/red/white
Common Diameters:Ø 6.0, 8.0mm
Common Sheaths:316 SS
Head Connection:M4 Screws 33mm PCD
Cold End Max Temperature:150 ° C

Application Notes:

Replacement element
For assembly into sheath
Low thermal mass
Inexpensive sensor
Suitable for equipment assemblies

Special Options:

Other insulators available
Single and duplex
Higher accuracy sensors A, 1/3,1/5,1/10 DIN
Sensors to 850 ° C available
Alternate extension wires
Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
2 or 4 wire
Tagging
RT can be replaced with a thermistor

TRI