With this RTD probe you can fit your existing transmitter to the DIN Plate.

Type Designation:TRD
Temperature Range:-100 to 500 ° C
Common Sensor Types:1 Pt 100 B
Temperature Coefficient:0.3850 ohms/° C
Wiring:3 wire, marked red/red/white
Common Diameters:Ø 6.0, 8.0mm
Common Sheaths:316 SS
Head Connection:M4 Screws 33mm PCD
Cold End Max Temperature:100 ° C
Tail detail:75mm tails, 10mm tinned

Application Notes:

Ready for customer fitted transmitter (specify which type is intended to be used)
Inexpensive insert
Very cheap design if maximum is 225 ° C
Used in pocket/head assemblies
Suitable for quick replacement on plants
Industry standard size
Spring loaded for good thermal contact
DIN standard lengths available

Special Options:

Duplex
Higher accuracy sensors A, 1/3,1/5,1/10 DIN
Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
2 or 4 wires
Compression fitting
Tagging
RT can be replaced with a thermistor

TRD
TRD