Usually supplied with a connection block in the head, although customers are able to fit an existing transmitter if specified.

Type Designation:TRH
Temperature Range:-100 to 500 ° C
Common Sensor Types:1 Pt 100 B
Temperature Coefficient:0.3850 ohms/° C
Wiring:3 wire, marked red/red/white
Common Diameters:Ø 6.0, 8.0mm
Common Sheaths:316 SS
Head Connection:M4 Screws 33mm PCD
Cold End Max Temperature:150 ° C

Application Notes:

Good as test probe
Inexpensive sensor
Very cheap design if maximum is 225 ° C
Used with or without thermowell
Isothermal head enclosure for accuracy
Protected terminations
DIN standard lengths available

Special Options:

Duplex, Multipoint
Higher accuracy sensors A, 1/3,1/5,1/10 DIN
Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
2 or 4 wires
Various IP rated heads available
The head can be changed for a larger isothermal enclosure
Transmitter available in head
Tagging
Compression fitting
RT can be replaced with a thermistor
Can be supplied without adaptor “A” for connection to nipple

TRH